BDA Interface v0.2.4.6

• Fix max device number.

BDA Interface v0.2.1.1239

• Added multistream & PLS support for TBS 5925, 6925 and 6983 cards (the direct hwcontrol mode in TBS.ini must be 0 (disabled))

BDA Interface v0.2.1.1142 / 0.2.0.21 For AltDVB

• [0.2.1.1142] improved TBS 5925, 5980 support
• [0.2.0.21] Fix Pinnacle 4xxe support (Technotrend BDA).

BDA Interface v0.2.1.1127

• Fixed LNB power management for TBS USB cards.( It is required at least December 2011 driver for TBS 5980,5925,6925 cards. )

BDA Interface v0.2.1.1103

• Fix DVBWorld BDA-extension support (DiSEqC 1.x)

BDA Interface v0.2.1.1095

• Improved multistream transponder support (Some multistream transponders are included in the mis.ini)

BDA Interface v0.2.1.1068 / 0.2.0.19 For AltDVB

• Netup BDA-extension support (DiSEqC 1.x).
• Fix Genpix BDA-extension support (ToneBurst, DiSEqC 1.x)

BDA Interface v0.2.1.1068 / 0.2.0.18 For AltDVB

• [0.2.1.1068] Added support for prototype of TBS6926. (updated TBS6925V2 broadband tuner with 250-2300MHz)
• [0.2.0.18] Fix Bestunar/DVBSky BDA-extension support (DiSEqC 1.x)

BDA Interface v0.2.1.938 / 0.2.0.17 For AltDVB

• Fix Compro BDA-extension support (DiSEqC 1.x).

Note from the DVB Support: v0.2.1.938 has more functions as you'll see in Tools > Device Info/Config

BDA Interface v0.2.0.16 For AltDVB

• Genpix BDA-extension support (ToneBurst, DiSEqC 1.x).
  
• Genpix 3dparty BDA-extension support (ToneBurst. DiSEqC 1.x).
  
• Compro BDA-extension support (DiSEqC 1.x, LNB power control).
  
• AnySee BDA-extension support (Toneburst, DiSEqC 1.x control).
  
• DVBWorld support improved.
  

BDA Interface v0.2.0.15 For AltDVB

• Bestunar/DVBSky BDA-extension support (DiSEqC 1.x control).
  
• Improved Omicom, TeVii BDA-extension support.

BDA Interface v0.2.0.14 For AltDVB

• TBS QBox detection fix.QBox BDA-extension preffered except Prof 7500.

BDA Interface v0.2.0.13 For AltDVB

• New option - Relock after timeout. Useful for motorized dishes or periodical signal drops.
  

BDA Interface v0.2.0.12 For AltDVB

• Fix modulation autodetect.
  
• 8VSB modulation for satellite devices used as NBC_QPSK
• [v0.2.0.11]Device configuration dialog implemented.

Now MS VC2008 SP1 runtime required (MSVCRT and MFC).

BDA Interface v0.2.0.10 For AltDVB

• Continous 22Khz tone control, when LOF Switch=0.
  For example: LOF Low=5150, LOF Switch=0, LOF High=0 - 22Khz tone off, LOF=5150
  LOF Low=0, LOF Switch=0, LOF High=10750 - 22Khz tone on, LOF=10750
  
• Turbosight 6925 V2 support (DiSEqC 1.x control).
  
• Turbosight QBOXs support fixed again (DiSEqC 1.x control).

BDA Interface v0.2.0.9 For AltDVB

• Turbosight QBOXs (and ODM like Prof 1100, MatchBox Pro) support fixed (DiSEqC 1.x, LNB power control).

BDA Interface v0.2.0.8 For AltDVB

• Revert 0.2.0.7 changes (LNB power-on failed for some devices).
  
• Omicom S2 DiSEqC 1.x minor fix (enable continous 22Khz (50ms) before DiSEqC command).
  
• Turbosight QBOX, QBOX2, QBOX-S2 and Prof 1100 support (DiSEqC 1.x, LNB power control). (Need testing !)
  

BDA Interface v0.2.0.7 For AltDVB

• Initial DVB-S tuning speed-up.

BDA Interface v0.2.0.6 For AltDVB

• Initial DVB-S tuning again fixed (power-on).

BDA Interface v0.2.0.5 For AltDVB

• Experimental Microsoft Windows7 DiSEqC BDA-extension support. Used in Windows7 Media Center (DiSEqC 1.0), if driver provide this extension.
  Most Win7-designed BDA-drivers provide this extension only for DiSEqC 1.0, but specification support RAW DiseqC 1.x/2.x and ToneBurst.
  Current build support only ToneBurst/DiSEqC 1.0 for this extension (but in sources implemented also RAW DiseqC support).
  
• New configuration file option BDA_TYPE - preffered BDA-extension (Microsoft or TeVii). BDA extension always autodetected and this option can change priority.

BDA Interface v0.2.0.4 For AltDVB

• Initial DVB-S tuning fixed (power-on, power-off).

BDA Interface v0.2.0.3 For AltDVB

• DVB-S tuning code cleanup.

BDA Interface v0.2.0.2 For AltDVB

• Change BDA type detection order. Use Turbosight, DVBWorld extension for TeVii devices with old drivers (pre 2009).
  
• Show Technotrend product name instead tuner filter name.
  
• Change credits and added project url in device selection dialog.
• *v0.1.0.12 and later not need any MSVC runtime.

BDA Interface v0.2.0.1 For AltDVB

• Removed DVBS2Signalling, DiSEqC, S_ROLLOFF settings from config.
  
• Added FEC support.
  
• LNB power-off support.
  
• Vendor-specific BDA extension autodetection. Now supported:
  
  • Technotrend BDA API (use ttBdaDrvApi_Dll.dll). ToneBurst + Raw DiSEqC, LNB power-off, Modulation type selection.
    
  • Hauppauge BDA extension. Raw DiSEqC, Modulation type selection, S2 Pilot/RollOff settings.
    
  • Conexant BDA extension. Raw DiSEqC, Modulation type selection, S2 Pilot/RollOff settings (optional), LNB power-off (optional).
    
  • DvbWorld BDA extension. ToneBurst + Raw DiSEqC, Modulation type selection.
    
  • Turbosight BDA extension. Raw DiSEqC, Modulation type selection, LNB power-off.
    
  • Twinhan BDA extension. ToneBurst + Raw DiSEqC, Modulation type selection, LNB power-off.
    
  • TeVii BDA API (TeVii.dll). Raw DiSEqC, LNB power-off, Modulation type selection.
    
  • Omicom BDA extension. ToneBurst + Raw DiSEqC, Modulation type selection.
    

BDA Interface v0.1.0.12 For AltDVB

• Recompiled with latest Technotrend BDA SDK (1.0.1.21). Now use ttBdaDrvApi_Dll.dll
  
• Now on Google Code - http://code.google.com/p/altbda2

BDA Interface v0.1.0.11 For AltDVB

• Technotrend budget için raw DiSEqC desteği eklenmiş..(Uyarı: DiSEqC, Technotrend BDA drivers v.4.4.10.x driverla çalışıyor..v5.0.0.x serisine DiSEqC desteği yok..
• Hauppauge DVB-S2 tuning (ayarlama) halen beta safhasında..

• New implementation of raw DiSEqC support for Technotrend budget
  warning: DiSEqC works only with Technotrend BDA drivers v.4.4.10.x! The v5.0.0.x series does NOT support DiSEqC
  
• Hauppauge DVB-S2 tuning still in beta phase

BDA Interface v0.1.0.10 Beta1 For AltDVB

• Hauppauge DiSEqC düzeltilmiş..

• Hauppauge DiSEqC has been fixed.

BDA Interface v0.1.0.10 Beta For AltDVB

• Hauppauge tescilli arayüz için destek eklenmiş..(8PSK tuning ve DiSEqC) ( DiSEqC test edilmedi..)
• Özel TT DiSEqC test sürümü

• Added support for Hauppauge proprietary interface (8PSK tuning and DiSEqC)
  
• Hauppauge DiSEqC has not been tested (couldn't find a user to perform tests), please send me a short description of your setup along with logs and state if it works or not.
  
• Private TT DiSEqC test release

BDA Interface v0.1.0.8 For AltDVB

• Airstar-2 de final BDA 4.4.1 driver la oluşan tuning problemi düzeltilmiş..
• Birçok sürücünün uygulamadığı "failed put_FrequencyMultiplier" mesajı silinmiş..

• fixed tuning for Airstar-2 with final BDA 4.4.1 drivers
  
• removed "failed put_FrequencyMultiplier" message, most drivers don't implement it

BDA Interface v0.1.0.7 For AltDVB

• Birden fazla topoloji düğümünde tuner sinyal istatisliği raporlandığında meydana gelen hatalar düzeltilmiş..

• fixed bug when tuner reports signal statistics on more than one topology node

BDA Interface v0.1.0.6 For AltDVB

• Kodlarda temizlik yapılmış..
• TwinHan AD-SP400 CI için düzeltmeler yapılmış..
• DVB-C Twinhan 2033 Mantis için düzeltmeler yapılmış..
• Bir özel sunumdaki put_Range deki hatalar düzeltilmiş..
• KNC One için düzeltmeler yapılmış..
• konfigürasyon dosyası eklenmiş..
  • a) DVB-S2 kanallar ayarlanamayınca varsayılan 8VSB, 8PSK değere dönüştürülür.. - Yeni driverlar 8PSK sinyali vermek için yeni değeri kullanır..
  • b) Şimdi daima COMMITED için DiSEqC konfigürasyonu

• code cleanup
• fixed bug for TwinHan AD-SP400 CI
  
• fixed bug for DVB-C Twinhan 2033 Mantis
  
• fixed bug in put_Range introduced in an private release
  
• fixed bug for KNC One
  
• added configuration file
  • a) those that can't tune to DVB-S2 channels try changing the default 8VSB
    to 8PSK value - newer drivers use new value for 8PSK signalling
    
  • b) DiSEqC configuration for now is always COMMITED

BDA Interface v0.1.0.1 For AltDVB

• fixed bug when there is no seperate Capture filter
  
• fixed bug with hard-coded LowBandF, HighBandF, SwitchF for DVB-S tuning
  
• added more error logging
  
• tweaked tuning

*Twinhan Starbox USB 2.0 la şimdi Çalışıyor ! (Diseq çalışmıyor..Yani uydu direk takılması gerekir..) 1.0.3.4 Twinhan BDA driver yüklü olsun..Siteden AltDVB 2.2 yi indirip bu dosyayı AltDVB klasörü içinde devices klasörüne winrar ile açın..ve Alt-DVB yi açıp Dev_BDA2Driver seçip Type deki değere tıklayıp OK.leyin..

*Tested Twinhan Starbox USB 2.0 with 1.0.3.4 BDA driver work ok ! ( Diseq not work )

New BDA Interface For AltDVB

v 0.1.0.0

AltDVB (v2.2.0 build 3912) için yeni bir BDA Aygıtı..Özellikle v5.0.0.x BDA drivers la TT S2-3200 (Diğer adı SkyStarHD) kartda çalışması için yapılmış..SkyStarHD veya TT S2-3200 kartınız varsa en son 5X BDA driverı yükleyip deneyin..BDA driverı olan farklı bir kart sahibi isenizde denemeyi ihmal etmeyin..Belki çalışabilir..

• For AltDVB v2.2.0 build 3912
• it might work with other BDA compatible devices, but no guarantee is given
• Technotrend's BDA drivers (still) have difficulties with DiSEqC 1.0 under BDA,especially when tuning to 8PSK transponders
• DVB-S support have been tested only with the TT S2-3200 card (aka SkystarHD)
• DVB-T support has been tested only with the TwinHan MagicBox Pro VP-704A (aka Pinnacle PCTV-310e)
• don't have access to DVB-C hardware, so it's not tested at all
• CI & IR remote will probably not ever be supported
  

BDA interface Webpage

https://github.com/crazycat69/AltBDA2/releases